AIROSOL COMPANY, INC.
MCKAY CHEMICALS
MECHANICS BRAND
11th &
MATERIAL
SAFETY DATA SHEET
|
PRODUCT NAME: |
BOAT-TRAILER GREASE GUN - PAK |
Hmis
Codes: |
H |
F |
R |
P |
|
PRODUCT CODE: |
50430 |
|
0 |
1 |
0 |
B |
|
SECTION I - MANUFACTURER
IDENTIFICATION |
|
MANUFACTURER’S NAME: |
Airosol Company, Inc. |
|
ADDRESS: |
|
|
EMERGENCY PHONE: |
1-800-535-5053 |
|
INFORMATION PHONE: |
1-800-633-9576 |
|
DATE REVISED: |
|
|
SECTION I I-
HAZARDOUS INGREDIENTS/SARA III INFORMATION |
This product contains barium compounds (CAS
#61750-48-5). Avoid prolonged or
repeated skin contact. Wash thoroughly after use.
Do not use on food processing machinery. Keep away from animals, feed or food
products.
|
SECTION III- PHYSICAL/CHEMICAL
CHARACTERISTICS |
|
BOILING POINT: |
No data available |
SPECIFIC GRAVITY: |
(H20=1) 0.972 |
|
VAPOR DENSITY: |
N/A |
EVAPORATION RATE: |
Not applicable |
|
APPEARANCE AND ODOR: |
Green Grease/mineral oil |
SOLUBILITY IN WATER: |
Negligible at 25° C |
|
TOXIC & HAZARDOUS INGREDIENTS |
None |
VISCOSITY SUS AT 100°F: |
Greater than or = to 100 |
|
VAPOR PRESSURE: |
N/A |
|
|
|
SECTION IV- FIRE AND EXPLOSION
HAZARD DATA |
|
FLASH POINT: |
374°F |
METHOD USED: |
COC |
|
FLAMMABLE LIMITS IN AIR BY
VOLUME: No data available. |
|
EXTINGUISHING MEDIA: Use water fog, dry chemical, carbon dioxide
or sand/earth. Water may cause
frothing. Closed containers exposed to
fire may be cooled with water. |
|
SPECIAL FIREFIGHTING PROCEDURES: |
Dense smoke. Firefighters should wear an approved
self-contained breathing apparatus. Do
not use water except as fog. |
|
UNUSUAL FIRE AND EXPLOSION
HAZARDS: Dense smoke. |
|
|
SECTION V- REACTIVITY DATA |
|
STABILITY: Stable. |
|
INCOMPATIBILITY (MATERIALS TO
AVOID): Strong oxidizers such as
hydrogen peroxide, bromine and chromic acid. |
|
HAZARDOUS DECOMPOSITION OR
BYPRODUCTS: Carbon monoxide and carbon
dioxide from burning. Keytones, aldehydes,
oxides of sulfur, oxides of nitrogen. |
|
HAZARDOUS POLYMERIZATION: Will not occur. |
Page
1
|
PRODUCT
NAME: |
BOAT-TRAILER
GREASE GUN - PAK |
|
PRODUCT
CODE: |
50430 |
|
SECTION VI- HEALTH HAZARD DATA |
|
CHRONIC EFFECTS OF OVEREXPOSURE: May be absorbed through skin. May cause skin and eye irritation with
prolonged or repeated contact. |
|
ACUTE TOXICOLOGICAL PROPERTIES: No data available. |
|
CARCINOGENICITY: |
NTP? |
IARC? |
OSHA REGULATED? |
|
Presently not on any list |
|||
EMERGENCY
AND FIRST AID PROCEDURES:
|
DIGESTION: |
If swallowed, seek medical attention
immediately. Induce vomiting if victim
is conscious. Never give anything by
mouth to an unconscious person. |
ADVICE TO THE PHYSICIAN:
High velocity infection under the skin may result in serious
injury. If left untreated the affected
area is subject to infection, disfigurement, lack of blood circulation and may
require amputation. when
dispensed by high pressure equipment this material can easily penetrate the
skin and leave a bloodless puncture wound.
Material injected into a finger can be deposited into the palm of the
hand. Within 24-48 hours the patient may
experience swelling, discoloration, and throbbing pain in the affected
area. Immediate treatment by a surgical
specialist is recommended.
|
SKIN
AND EYE CONTACT: |
|
EYES:
Immediately flush eyes with large amounts of water for at least 15
minutes. Hold eyelids apart to ensure
complete flushing. Do not attempt to
neutralize with chemical agents. Get
medical help immediately. |
|
SKIN:
Remove excess with cloth or paper and wash area thoroughly with soap
and water. For high pressure injection
under the skin see a physician immediately. |
|
INHALATION: Remove exposed person to fresh air if
discomfort is experienced while handling hot product. |
|
SECTION VII- PRECAUTIONS FOR
SAFE HANDLING AND USE |
|
STEPS TO BE TAKEN IN CASE LARGE
AMOUNT OF MATERIAL IS RELEASED OR SPILLED:
Use absorbent sweeping compound to soak up material. Put into container. Dispose as hazardous waste. |
|
WASTE DISPOSAL METHOD: Dispose as hazardous waste in accordance
with EPA, RCRA.. |
|
PRECAUTIONS TO BE TAKEN IN HANDLING
AND STORING: Keep container closed
until ready for use. |
|
SECTION VIII- CONTROL MEASURES |
|
RESPIRATORY PROTECTION: NA. |
|
VENTILATION: NA. |
|
PROTECTIVE GLOVES: NA |
|
EYE PROTECTION: Chemical safety goggles and, if handled
hot, full face shield. |
|
OTHER PROTECTIVE CLOTHING OR
EQUIPMENT: None |
|
SECTION IX- REGULATORY
INFORMATION |
SUPERFUND AMENDMENTS AND REAUTHORIZATION ACT OF 1986 (SARA)
TITLE III:
CHEMICAL CAS NUMBER CONCENTRATION
%
Keep
away from children
Page
2
|
PRODUCT
NAME: |
BOAT-TRAILER
GREASE GUN - PAK |
|
PRODUCT
CODE: |
50430 |
|
SECTION IX- REGULATORY
INFORMATION (continued) |
FEDERAL EPA:
Comprehensive Environmental Response, Compensation and Liability Act of
1980 (CERCLA) requires the notification of the
CHEMICAL CAS NUMBER CONCENTRATION
% RQS IN #’s
None
listed
Formula
trade secret
NEW
Petroleum
oil (grease)
TOXIC SUBSTANCES CONTROL ACT (TSCA) STATUS: Listed
NFPA RATING AS AN AEROSOL:
NA
|
SECTION X- DISCLAIMER |
NOTE:
THE INFORMATION IN
THIS DOCUMENT IS BELIEVED TO BE CORRECT AS OF THE DATE ISSUED. HOWEVER, NO WARRANTY OF MERCHANTABILITY,
FITNESS FOR ANY PARTICULAR PURPOSE, OR ANY OTHER WARRANTY IS EXPRESSED OR TO BE
IMPLIED REGARDING THE ACCURACY OR COMPLETENESS OF THIS INFORMATION OR THE
PRODUCT, THE SAFETY OF THIS PRODUCT, OR THE HAZARDS RELATED TO ITS USE. THIS INFORMATION AND PRODUCT ARE FURNISHED "AS
IS" AND ON THE CONDITION THAT THE
PERSON RECEIVING THEM SHALL MAKE THEIR OWN DETERMINATION AS TO THE SUITABILITY
OF THE PRODUCT FOR THEIR PARTICULAR PURPOSE AND ON THE CONDITION THEY ASSUME
THE RISK OF THEIR USE THEREOF.
Page
3